Coated Glass Mesh GM-95-NA is PTFE Coated Mesh with a 4mm square aperture PTFE coated mesh. Ideal for use as a finished conveyor belt when used for drying and curing inks on screen printed products such as point of display and t-shirts. We can manufacture any belt size up to 5200mm wide and to your required length. 4000mm wide is our general stock width
We can cater for any special requirements you require for Coated Glass Mesh GM-95-NA i.e edgings, custom sizes special widths, our team can help assist you with dispatch, customs and shipping, we ship to over 30 destinations and have been established for over 20 years. Please get in touch with our Technical Sales team on +44 (0) 1422 366386 or email at sales@techbelt.com
| PTFE Coated Glass Mesh GM-95-NA – Applications |
|---|
| PTFE Coated Glass Mesh is used in applications such as the drying of printed products for example; point of display stands, T-shirts, glass and mass produced paper prints. Print dryers usually opt for Ultra violet, Infra red or hot air as the heat source to dry.
Other applications range from the drying of cereals, non woven’s, charcoal interlinings, carpet & carpet tiles, printed circuit boards and shrink-wrap tunnels but to name a few. |
| Features and Benefits – Coated Glass Mesh GM-95-NA |
|---|
| PTFE open mesh conveyor belting is light weight and cost effective therefore is easy to handle and less expensive than wire alternatives that can be difficult to replace. |
| Often supplied with a metallic clipper type fastener these style of belts can easily be removed and replaced therefore minimising downtime and saving money. |
| This material can be offered in carbon loaded black therefore providing antistatic properties. |
| Material Properties | ||
|---|---|---|
| • High temperature resistant – up to 260°C | • Excellent release properties | • Exceptional chemical resistance |
| Available in widths up to 5200mm, manufactured in various thicknesses and weights If your requirements are not available to purchase online please contact our sales team on +44 (0)1422 366386 |
||
| Specification | |||
|---|---|---|---|
| • Reference: | GM-95-NA (4×4) | • Colours: | Brown / Black |
| • Standard width: | 3600mm | • Tensile strength: | 3800 N/5cm |
| • Thickness: | 0.95mm | • Temperature resistance: | 260°C |
| • Weight: | 460g/m2 | ||
We can cater for any special requirements you require for PTFE Coated Glass Mesh i.e custom sizes special widths, our team can help assist you with dispatch, customs and shipping, we ship to over 30 destinations and have been established for over 20 years. Please get in touch with our Technical Sales team on +44 (0) 1422 366386 or email at sales@techbelt.com
| GM-95-NA | 1000mm Wide x 15715mm Long E25/2/2 (R136), 1000mm Wide x 16280mm Long E25/2/2 (R136), 900mm Wide x 6710mm Long E25/2/2 (R136) |
|---|
