PTFE Coated Metal Detectable Tape Brown Tefsil 3

Metal Detectable Tape Tefsil3 features a PTFE/glass backing with Aluminium foil and a pressure-sensitive silicone adhesive cover with a yellow protective liner.

The PTFE/glass is ideal for non-stick surface applications on heat sealing machines, form seal equipment & blister packaging. Other release applications could be chutes, dead plates or conveyor rails. The Aluminium foil is perfect for being identified by metal detector equipment should the tape become worn or fall from its work surface.

The roll length on this product is 33 yards.

A silicone adhesive backing applied to the Aluminium foil allows for reliable bonding to the work area.

Free Shipping Is Available On All Orders Over $300 on Metal Detectable Tape Tefsil3 this will be calculated at checkout. Below this amount we offer a flat rate of $30. If you cannot see the size you require, contact sales@techbelt.com as we custom slit tapes.

$14.00$651.00 Exc. VAT

Description

Metal Detectable Tape Tefsil 3 – Material Properties
• Extremes of heat and cold resistance: -104°F to + 500°F • Chemical inertness: Affected only by a few rare substances at very high temperatures
• High Release from sticky materials ‘Non-Stick’ • Easy cleaning (nothing bonds permanently)
• Low friction coefficient: 0.04 – 0.10; depending on load and surface speed • Chemical corrosion and moisture resistance
• Mildew and fungus resistance • Ultra-Violet, Infrared, Microwave, Radio Frequency resistance
• Non Combustible – Self Extinguishing • Low Thermal Expansion: < 5%
• Supplied ex stock from 0.118 to 19.68 inch wide • Lightweight and energy efficient for economical operation
Specification
• Coated Fabric Thickness (mm/inch) 0.2
1⁄64 in
• Weight (gr/m2) 340
• Adhesion (N.cm) 6.00 • Temperature Resistance (°C) -104°F + 500°F
Declaration of Compliance for Food Contact Materials
This product meets the relevant requirements laid down in the Regulation (EC) No. 10/2011 on plastic materials and articles intended to come into contact with food and in articles 3, 11(5), 15 and 17 of the Regulation (EC) No 1935/2004 on materials and articles intended to come into contact with food, provided that the food contact is limited to the non-adhesive side.
On the pre-condition that the product is used according to its specification global and specific migration shall meet the legal requirements.
One-sided migration tests on the non-adhesive side have been performed according to Regulation (EC) No. 10/2011 and the LFGB (Lebensmittel, Bedarfsgegenstände und Futtermittelgesetzbuch) by Intertek Consumer Goods GmbH, Würzburger Str.
152, 90766 Fürth / Deutschland; Test Report No. FUFDC 1308655 under the following conditions
Food Simulant Test Condition Result
• Acetic Acid (3%ig) 4 Hours at 212°F < 10 mg / dm2
• Ethanol (10%ig) 4 Hours at 212°F < 1 mg / dm2
• Olive Oil 2 Hours at 656°F < 1 mg / dm2
Further tests have been performed on specific migration of formaldehyde, primary aromatic amines, specific migration of fluoride, migration of metals, screening of organic phenolic compounds, screening of a migrate on volatile substances and sensory testing with positive results. The following substances with restrictions and / or specifications are used:
Substance Restrictions and / or Specifications
• Tetrafluoroethylene
• CAS-Nr. 00116-14-3
• Ref.-No. 25120
SML = 0,05 mg/kg
• Glasfiber
• Ref.-No. 55520
none
Purity criteria in accordance with Directives 2008/60/EC (purity criteria concerning sweeteners for use in food stuffs), 95/45/EC (purity criteria concerning colours for use in foodstuffs) and 2008/84/EC (purity criteria on food additives other than colours and sweeteners)are not applicable.
This product is suitable for all kinds of foodstuff in the temperature range of -104°F to + 500°F. Please do not fold or crease the material, do not use scrapers or brushes for cleaning and avoid food contact with the adhesive side.
This product is manufactured under the certified quality management system according to ISO 9001:2008 according to the rules for good manufacturing practice for materials and articles intended to come into contact with food as described in regulation (EC) No. 2023/2006
Important Storage / Shelf Life and Application Information
• Storage:
We strongly recommend that Techbelt silicone PSA tapes are stored at room temperature conditions of 70⁰F (21⁰C) and 50% relative humidity and should be protected from direct sunlight and moisture.
• Shelf Life:
If stored correctly, these products retain their performance and properties for 6 months from date of manufacture.
• Surfaces:
The surfaces of the materials to be bonded must be dry and clean. Condensation of moisture on surfaces to be bonded (e. g. when carrying cold objects into a warmer room) must be avoided. The materials to be bonded must be free from dust, grease, oil and separating agents and cleaned if necessary.
• Cleaning:
For cleaning the surfaces only use a clean cloth and a solvent that is compatible with the materials, e. g. benzines, alcohol, esters or ketones.

Shipping Information

Shipping - World Map Placeholder
Shipping - World Map

Shipping - World Map Placeholder
Shipping - World Map

[su_accordion class=””] [su_spoiler title=”SHIPPING INFO” open=”no” style=”default” icon=”plus” anchor=”” class=””]We’re here to help! Please don’t hesitate to contact us if you have any queries or special requirements regarding shipping or the return of one of our products[/su_spoiler] [su_spoiler title=”USA SHIPPING” open=”yes” style=”default” icon=”plus” anchor=”” class=””]Free Shipping Is Available On All Orders Over $300 Calculated at Checkout. Below this amount we offer a flat rate of $30. If you have any questions contact sales@techbelt.com for further information or our chat facility (bottom left of screen) and we will be happy to provide you with a quotation for the shipping charges.[/su_spoiler] [su_spoiler title=”EUROPE & WORLDWIDE SHIPPING” open=”no” style=”default” icon=”plus” anchor=”” class=””]We ship goods Worldwide, the cost of this will be dependent on the location and either the volumetric weight or the product weight including packaging whichever is the greatest, the cost of this will be confirmed at quotation stage of your order.[/su_spoiler] [/su_accordion]

Video

[su_youtube_advanced url=”https://www.youtube.com/watch?v=EuIC1hLqhF4″ modestbranding=”yes” https=”yes”]

Reseller Information

At Techbelt we offer generous discounts for volume buyers and resellers

We can also offer credit accounts talk to our sales team to find out more