Search
TF-R62-AD PTFE Film Tape

Techbelt TF-R62-AD PTFE Film Tape is a red-orange specially oriented polytetrafluoroethylene (PTFE) film with high temperature silicone pressure sensitive adhesive.

Ideally suited for roller wrapping for polyethylene extrusion, coating & laminating processes and electrical insulation for coils and transformers.

Free Shipping Is Available On All Orders Over $300 of TF-R62-AD PTFE film tape and will be calculated at checkout. Below this amount we offer a flat rate of $30. If you cannot see the size you require, contact sales@techbelt.com as we custom slit tapes.

Description

Material Properties
• Extremes of heat and cold resistance: -163.5°C to + 500°C • Chemical inertness: Affected only by a few rare substances at very high temperatures
• High Release from sticky materials ‘Non-Stick’ • Easy cleaning (nothing bonds permanently)
• Low friction coefficient: 0.04 – 0.10; depending on load and surface speed • Chemical corrosion and moisture resistance
• Mildew and fungus resistance • Ultra-Violet, Infrared, Microwave, Radio Frequency resistance
• Non Combustible – Self Extinguishing • Low Thermal Expansion: < 5%
• Food Approval (USFDA) • Lightweight and energy efficient for economical operation
Additional Information
Availability: PTFE adhesive Film tape is supplied in 37 yard rolls, standard widths are 1, 1.5 & 2 inch
Prior to adhesion, clean the surface and remove any dust or oil. Whilst applying do not stretch material be careful to avoid any formation of air bubbles or wrinkles. To remove the tape, peel off slowly at an angle of 180˚. We recommend storing this product at room temperature away from direct sunlight and moisture. For optimum adhesion the tape should be used within 12 months of purchase.
This material is unaffected by biological or chemical agents, heat or cold within its temperature range, or by most areas of the electromagnetic spectrum.
PTFE (Teflon) begins to soften at 500°F, increasing in wear rate, Somewhat above 572°F fumes are given off and these should not be inhaled. COSHH data is available upon request.
Specification
• Nominal Total Thickness: 0.0039 inch • Elongation: 100%
• Adhesion to Steel: 0.25 N/0.75 inch • Tensile Strength: 61 N/1.96 inch
• Breakdown Voltage: 8 kV • Temperature Resistance: -163 to +500°F
• Colour: Red / Orange • Length: 37 yards
• Width: 1, 1.5 & 2 inch • Core ID ø: 3 inch