Search
PTFE Adhesive Tape 0.127mm TEFSIL® 5

PTFE Adhesive Tape 0.127mm is a PTFE coated glass cloth tape (often incorrectly referred to as Teflon®) with a silicone adhesive applied to one surface of the materials that is heat resistant. The maximum working temperature of the adhesive is 260°C/500°F. It can be thermoset at by heating to 200°C/392°F for a 4 hour cycle.

Tefsil 5 Adhesive is our most popular PTFE coated glass cloth tape as it offer a long longer life than Tefsil 3 Adhesive but is at a cost that offer great value. Our “5thou” product has 250g/m2 of material too so please be sure to compare this to your current supplier as this is usually only 230g/m2.

The roll length on this product is 30mtr. (Metric) | This equates to 98.4ft in imperial measurement USA

Bold Sale Brand Website
Seen It Cheaper?

If you’ve seen a product we sell cheaper elsewhere,  please email the quotation to sales@techbelt.com, and we’ll do our best to match or beat the price.

**Your email will be treated with the strictest of confidentiality**

Worldwide Shipping Available

£6.03£603.66 Exc. VAT

Description

USA/Imperial Conversion

 

Tefsil 5 (Imperial)
Coated weight (lbs/Sq.ft) = 0.0512 Thickness in (inch) = 0.005”

 

PTFE Adhesive Tape 0.127mm – Material Properties
• Extremes of heat and cold resistance: -73°C to + 260°C – Imperial -99.4°F to +500°F • Chemical inertness: Affected only by a few rare substances at very high temperatures
• High Release from sticky materials ‘Non-Stick’ • Easy cleaning (nothing bonds permanently)
• Low friction coefficient: 0.04 – 0.10; depending on load and surface speed • Chemical corrosion and moisture resistance
• Mildew and fungus resistance • Ultra-Violet, Infrared, Microwave, Radio Frequency resistance
• Non Combustible – Self Extinguishing • Low Thermal Expansion: < 5%
• Food Approval (USFDA) Lightweight and energy efficient for economical operation>/td>
Additional Information
Availability: PTFE adhesive tape is available ex stock and can be supplied at any width from 3mm up to 1000mm wide.
Fabric Care: Do not fold or crease when handling and installing. The fabric can eventually discolour in sunlight (turns white), but otherwise is unaffected by biological or chemical agents, heat or cold within its temperature range, or by most areas of the electromagnetic spectrum.
The material can be converted to engineering product. Consult our Technical staff for further details. Also available chemically etched one side for proprietary adhesive bonding. Standard etch is silica based, sodium based etch is available on request.
PTFE (often incorrectly referred to as Teflon®) begins to soften at 260°C/500°F, increasing in wear rate, Somewhat above 300°C/572°F fumes are given off and these should not be inhaled. COSHH data is available upon request.
Specification
• Coated Fabric Thickness (mm) 0.127 • Warp Tongue Tear Strength (N) 23
• Coated Fabric Weight (g/m2) 250 • Coating Adhesion (N/5cm) N.A
• % Coating 54 • Peel Adhesion (N/2.5cm) 12
• Adhesive Weight (g/m2) 55 • Surface Resistance (Ω/m2) Insulative
• Warp Tensile Strength (N/5cm) 1600 • Operating Temperature -72 to +260°C  -99.4°F to +500°F
Important Storage / Shelf Life and Application Information
• Storage:
We strongly recommend that Techbelt silicone PSA tapes are stored at room temperature conditions of 21⁰C (70⁰F) and 50% relative humidity and should be protected from direct sunlight and moisture.
• Shelf Life:
If stored correctly, these products retain their performance and properties for 6 months from date of manufacture.
• Surfaces:
The surfaces of the materials to be bonded must be dry and clean. Condensation of moisture on surfaces to be bonded (e. g. when carrying cold objects into a warmer room) must be avoided. The materials to be bonded must be free from dust, grease, oil and separating agents and cleaned if necessary.
• Cleaning:
For cleaning the surfaces only use a clean cloth and a solvent that is compatible with the materials, e. g. benzines, alcohol, esters or ketones.

Download PTFE Adhesive Tapes Data Sheet

Additional information

Supplied in 30 Metre Rolls Unless Specified Differently

1m Width x 10m Length, 1m Width x 15m Length, 1m Width x 20m Length, 1m Width x 25m Length, 1m Width x 30m Length, 1m Width x 5m Length, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 85mm, 90mm, 95mm, 100mm, 125mm, 130mm, 150mm, 175mm, 200mm, 225mm, 250mm, 275mm, 300mm, 325mm, 350mm, 375mm, 400mm, 425mm, 450mm, 475mm, 500mm, 600mm, 700mm, 800mm, 900mm, 1000mm

Shipping Information

Shipping - World Map Placeholder
Shipping - World Map

We’re here to help! Call Us On on +44 (0) 1422 366386 Please don’t hesitate to contact us if you have any queries or special requirements regarding shipping or the return of one of our products

UK MAINLAND SHIPPING, INCLUDING THE ISLANDS AND REMOTE LOCATIONS

Shipping within the UK is normally a next day delivery service by Courier up to a weight of 30kgs, however remote locations, including the Islands and Northern Ireland will be a 2 day service and surcharges may apply for any item(s) above this weight or if you are located in the remote areas etc. Then please contact our Main Office on +44 (0) 1422 366386 for further information and we will be happy to provide you with a quotation for the shipping charges.

EUROPE & WORLDWIDE SHIPPING

We ship goods Worldwide, the cost of this will be dependent on the location and either the volumetric weight or the product weight including packaging whichever is the greatest, the cost of this will be confirmed at quotation stage of your order.

Video

Reseller Information

At Techbelt we offer generous discounts for volume buyers and resellers

We can also offer credit accounts talk to our sales team to find out more +44 (0) 1422 366386 

Tefsil® Technical Help Sheet

General Installation of Tefsil® Adhesive Products PDF

You may also like…