Antistatic Fusing Belts

Antistatic Fusing Belts are often the belt of choice for machine manufacturers of fusing, laminating or powder coating lines due to the excellent extreme temperature resistance and non-stick properties the material offers.


Flatbed laminator systems are double belt presses with both in line heating and cooling sections. The materials that are laminated are often covered with a heat activated adhesive therefore the PTFE belt is an excellent choice due to its non stick properties. Also due to the high and low temperatures experienced immediately after each other within the process, the belts are well suited to handle this quick change in temperature.

We can manufacture aftermarket belts to fit any type of machine in the market today. These include but are not limited to:

  • Reliant
  • Meyer
  • Hashima
  • Kannegiesser

Any of these OEM machines can be supplied with either jointed or seamless style fusing belts. Seamless types tend to be used where delicate products are being laminated and no mark off is essential.

Features / Benefits

The belts are usually supplied in antistatic black and are available in a number of thicknesses. Often supplied endless these belts can be fitted on site with specialist equipment if required.

 Material Properties

1) Smooth non stick PTFE coating
2) Temperature resistant from -73°C to plus 260°C
3) Antistatic properties

Additional Information

Antistatic PTFE glass cloth is usually offered in 0.25mm, 0.37mm and 0.40mm thick.
The joint is a smooth scarfed overlap type to prevent marking of the products.

Material is available up to 2600mm (8′ 6 3/8“) wide.

We now offer seamless fusing belts which can be made up to 2600mm (8′ 6 3/8“) wide x 13 meters (42′ 7 13/16“)  in circumference

Download our Antistatic Fusing Belts Information Sheet (pdf).

Contact Techbelt today to discuss your requirement on +44 (0) 1422 366386

Antistatic Fusing Belts
Antistatic Fusing Belts