Description
Metal Detectable Tape – Material Properties | |
---|---|
• Extremes of heat and cold resistance: -40°C to + 260°C | • Chemical inertness: Affected only by a few rare substances at very high temperatures |
• High Release from sticky materials ‘Non-Stick’ | • Easy cleaning (nothing bonds permanently) |
• Low friction co-effecient: 0.04 – 0.10; depending on load and surface speed | • Chemical corrosion and moisture resistance |
• Mildew and fungus resistance | • Ultra-Violet, Infra-Red, Micro-Wave, Radio Frequency resistance |
• Non Combustible – Self Extinguishing | • Low Thermal Expansion: < 5% |
• Supplied ex stock from 3mm to 500mm wide | • Lightweight and energy efficient for economical operation |
Specification | |||
---|---|---|---|
• Coated Fabric Thickness (mm) | 0.22 | • Weight (gr/m2) | 340 |
• Adhesion (N.cm) | 6.00 | • Temperature Resistance (°C) | -40 / +260 |
Declaration of Compliance for Food Contact Materials | ||
---|---|---|
This product meets the relevant requirements laid down in the Regulation (EC) No. 10/2011 on plastic materials and articles intended to come into contact with food and in articles 3, 11(5), 15 and 17 of the Regulation (EC) No 1935/2004 on materials and articles intended to come into contact with food, provided that the food contact is limited to the non-adhesive side. | ||
On the pre-condition that the product is used according to its specification global and specific migration shall meet the legal requirements. One-sided migration tests on the non-adhesive side have been performed according to Regulation (EC) No. 10/2011 and the LFGB (Lebensmittel, Bedarfsgegenstände und Futtermittelgesetzbuch) by Intertek Consumer Goods GmbH, Würzburger Str. 152, 90766 Fürth / Deutschland; Test Report No. FUFDC 1308655 under the following conditions |
||
Food Simulant | Test Condition | Result |
• Acetic Acid (3%ig) | 4 Hours at 100°C | < 10 mg / dm2 |
• Ethanol (10%ig) | 4 Hours at 100°C | < 1 mg / dm2 |
• Olive Oil | 2 Hours at 175°C | < 1 mg / dm2 |
Further tests have been performed on specific migration of formaldehyde, primary aromatic amines, specific migration of flouride, migration of metals, screening of organic phenolic compounds, screening of a migrate on volatile substances and sensory testing with positive results. The following substances with restrictions and / or specifications are used: | ||
Substance | Restrictions and / or Specifications | |
• Tetrafluoroethylen • CAS-Nr. 00116-14-3 • Ref.-No. 25120 |
SML = 0,05 mg/kg | |
• Glasfiber • Ref.-No. 55520 |
none | |
Purity criteria in accordance with Directives 2008/60/EC (purity criteria concerning sweeteners for use in food stuffs), 95/45/EC (purity criteria concerning colours for use in foodstuffs) and 2008/84/EC (purity criteria on food additives other than colours and sweeteners)are not applicable. | ||
This product is suitable for all kinds of foodstuff in the temperature range of -40°C to +260°C. Please do not fold or crease the material, do not use scrapers or brushes for cleaning and avoid food contact with the adhesive side. | ||
This product is manufactured under the certified quality management system according to ISO 9001:2008 according to the rules for good manufacturing practice for materials and articles intended to come into contact with food as described in regulation (EC) No. 2023/2006 |
Important Storage / Shelf Life and Application Information |
---|
• Storage: We strongly recommend that Techbelt silicone PSA tapes are stored at room temperature conditions of 21⁰C (70⁰F) and 50% relative humidity and should be protected from direct sunlight and moisture. |
• Shelf Life: If stored correctly, these products retain their performance and properties for 6 months from date of manufacture. |
• Surfaces: The surfaces of the materials to be bonded must be dry and clean. Condensation of moisture on surfaces to be bonded (e. g. when carrying cold objects into a warmer room) must be avoided. The materials to be bonded must be free from dust, grease, oil and separating agents and cleaned if necessary. |
• Cleaning: For cleaning the surfaces only use a clean cloth and a solvent that is compatible with the materials, e. g. benzines, alcohol, esters or ketones. |