Fendt Round Baler Belts – Techbelt is a manufacturer of aftermarket round baler belts made to fit a wide range of round baler machines available such as Fendt Round Baler.
Our products are not genuine OEM parts and are aftermarket products which are hand cut and customised to suit your machine. We carry a large amount stock and can dispatch these in 5-7 days from placing your order – Sooner if required.
We only use the highest quality materials that in our opinion match the quality of genuine dealer parts. The round baler belt come with a MATO clipper fastener for ease of installation
Our Belts are sold as a singular belt but can also be purchased as a set. We are offering a discount of 5% at checkout on belt sets use code balerbeltsetpromo for a limited time only.
** Please note our belts are between 5.2mm and 5.6mm We recommend you check your current baler belt thickness before ordering. If your belt is not the same, then we recommend you do not purchase it. Once manufactured we cannot offer a refund. This is because our belts are bespoke and are made to order.
The belts are sold on the understanding they will be fitted by an experienced and knowledgeable installer. It is imperative that the Mato fastener is joined in such a way as to ensure the edges of both ends are perfectly parallel and in line. It is also critical that the belts are not over-tensioned. If any of the above are not adhered to, this can cause the belts to prematurely fail, track off, or bow. **
£316.78 – £316.79 Exc. VAT
| Fendt Round Baler Belts – Dimensions | |||
|---|---|---|---|
| • Belt Thickness (mm) | 5.2 | • Weight (kg/ml) | 6 |
| • Top Cover Thickness (mm) | 1.5 | • Bottom Cover Thickness (mm) | 0.5 |
| • Operating Temperature | -25 to +80°C | • Maximum Width | 1400mm |
| Construction Mechanical Properties of Fendt Round Baler Belts | |||
|---|---|---|---|
| • Carcass Type | Plied | • Warp Yarns | Polyester |
| • Number of Plies | 3 | • Tensile Strength Warp (ISO 283) | >315 N/mm |
| • Elongation at Break Warp (ISO 283) | >10% | • Elongation Under 10% Load (ISO 283) | < 1.5% |
| • Adhesion Between Cover & Carcass (ISO 252) | > 4 N/mm | • Adhesion Between Plies & Plies (ISO 252) | > 4.5 N/mm |
| Cover Mechanical Properties – | |||
|---|---|---|---|
| • Tensile Strength at Break (ISO 37) | > 18 MPa | • Elongation at Break (ISO 37) | > 450% |
| • Abrasion (ISO 4649) | < 170 mm³ | • Hardness (ISO 868) | 62 |
Download Round Baler Belt Material Data Sheet
| Fendt Baler Model Size | 4160V Singular Belt 220mm wide x 11000mm, 4160VFD Singular Belt 220mm wide x 11000mm, 4160VR Singular Belt 220mm wide x 11000mm, 4180V Singular Belt 220mm wide x 11555mm |
|---|
