Techbelt is a manufacturer of aftermarket round baler belts made to fit a wide range of round baler machines available such as Case-IH.
Our Case-IH Baler Belts are not genuine OEM parts and are aftermarket products which are hand cut and customised to suit your machine. We carry a large amount stock and can dispatch these in 5-7 days from placing your order – Sooner if required.
We only use the highest quality materials that in our opinion match the quality of genuine dealer parts. The Case-IH Baler Belts come with a MATO clipper fastener for ease of installation
Our Belts are sold as a singular belt but can also be purchased as a set. We are offering a discount of 5% at checkout on belt sets use code balerbeltsetpromo for a limited time only.
** Please note our belts are between 5.2mm and 5.6mm We recommend you check your current baler belt thickness before ordering. If your belt is not the same, then we recommend you do not purchase it. Once manufactured we cannot offer a refund. This is because our belts are bespoke and are made to order.
The belts are sold on the understanding they will be fitted by an experienced and knowledgeable installer. It is imperative that the Mato fastener is joined in such a way as to ensure the edges of both ends are perfectly parallel and in line. It is also critical that the belts are not over-tensioned. If any of the above are not adhered to, this can cause the belts to prematurely fail, track off, or bow. **
£197.21 – £322.11 Exc. VAT
| Dimensions | |||
|---|---|---|---|
| • Belt Thickness (mm) | 5.2 | • Weight (kg/ml) | 6 |
| • Top Cover Thickness (mm) | 1.5 | • Bottom Cover Thickness (mm) | 0.5 |
| • Operating Temperature | -25 to +80°C | • Maximum Width | 1400mm |
| Construction Mechanical Properties | |||
|---|---|---|---|
| • Carcass Type | Plied | • Warp Yarns | Polyester |
| • Number of Plies | 3 | • Tensile Strength Warp (ISO 283) | >315 N/mm |
| • Elongation at Break Warp (ISO 283) | >10% | • Elongation Under 10% Load (ISO 283) | < 1.5% |
| • Adhesion Between Cover & Carcass (ISO 252) | > 4 N/mm | • Adhesion Between Plies & Plies (ISO 252) | > 4.5 N/mm |
| Cover Mechanical Properties | |||
|---|---|---|---|
| • Tensile Strength at Break (ISO 37) | > 18 MPa | • Elongation at Break (ISO 37) | > 450% |
| • Abrasion (ISO 4649) | < 170 mm³ | • Hardness (ISO 868) | 62 |
| Case IH Baler Model Size | Case IH RB444 178mm x 69215mm, Case IH RB454 178mm x 8712mm, Case IH RB4X451 178mm x 8712mm, Case IH RB565 178mm x 10681mm, Case IH RBX441 178mm x 69215mm, Case IH RBX442 178mm x 69215mm, Case IH RBX443 178mm x 69215mm, Case IH RBX452 178mm x 8712mm, Case IH RBX453 178mm x 8712mm, Case IH RS451 178mm x 12065mm, Case IH RS551 178mm x 12065mm, Case IH RS561, RS561A 178mm x 13894mm, Case-IH RB455 178mm x 10681mm, Case-IH RB455A Utility 178mm x 8712mm, Case-IH RB464 178mm x 10681mm, Case-IH RB465 178mm x 10681mm, Case-IH RB554 178mm x 10681mm, Case-IH RB564 178mm x 10681mm, Case-IH RBX461 178mm x 10681mm, Case-IH RBX462 178mm x 10681mm, Case-IH RBX463 178mm x 10681mm, Case-IH RBX552 178mm x 8712mm, Case-IH RBX553 178mm x 8712mm, Case-IH RBX561 178mm x 10681mm, Case-IH RBX562 178mm x 10681mm, Case-IH RBX563 178mm x 10681mm |
|---|
